Showing 25–36 of 55 results
-
Sale!
$499.00 Original price was: $499.00.$199.00Current price is: $199.00.
- 4.3in HD Color LCD Touch Screen
- Foldable Spool Holder
- Auto-Leveling with Force Sensitive Resistor
- Bright LED Beside Nozzle
- Toolbox Storage Drawer
- Adjustable XY Rotary Belt Tensioners
- Photoelectric Filament Sensor
- New Extruder Locking Design (Flexible Fixator)
- Seamless Wiring System
- Creality Tempered (Carborundum) Glass Hotbed
- Optical End-stops
- 8-Bit (32-Bit – Kickstarter) Trinamic Drivers
- Resume Print Function
- Portable Carry Handle
- Dual Z-Axis
- Unique Caved Heatsink
-
Sale!
$39.99 Original price was: $39.99.$30.00Current price is: $30.00.
- Fits Ender 3, 3 Pro, Ender 5, 5 Pro, CR10, and similar models.
- ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
- Upgrade the firmware by SD card. It is easy and convenient to operate.
- This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
- Serial port screen mode supports two printing modes: SD card and U disk.
- Reserve WIFI port and WIFI function is realized by an external WIFI module.
- LCD12864 mode uses EXP1, EXP2, and EXP3. EXP1 and EXP2 are LCD screen ports of a normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ï¼›
-
Sale!
$99.00 – $125.00
- Creality 3D is working with its wonderful community of users and contributors to improve this open-sourced product daily. A design culminating from some of the best and brightest minds in the 3D printing world.
- A new state-of-the-art “C-MAG” magnetic sticker is designed for Ender-3 PRO, it is completely removable, flexible, and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
- We adopt the Mean Well power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. Its power supply shields the printer from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- Our upgraded control board offers state-of-the-art, “Resume Print” technology. Should your printer suffer unexpected power outages, it will resume from the last recorded extruder position. Goodbye failed prints! The advanced MK-8 extruder’s genius design greatly reduces the risk of clogging and uneven extrusion. High-precision ball bearing wheels made from Delrin/POM engineering thermoplastic deliver high stiffness, low friction, and excellent dimensional stability.
- Redesigned with a much more sturdy, 40×40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
-
Sale!
$50.99 Original price was: $50.99.$44.99Current price is: $44.99.
- SKR MINI E3 V2.0, version: V2.0
- The hot-bed MOS tube uses WSK220N04, a low on-resistance, a larger heat dissipation area, and reduces heat generation
- Optimize the plate and the frame to avoid the phenomenon of screw hole gaps. Avoid the phenomenon of screws hitting components.
- Add a parallel double Z-axis interface.
- Supports BLtouch, detection of blocked rotation, resumption of the shutdown, shutdown after shutdown, etc .;
-
Sale!
$429.00 Original price was: $429.00.$349.99Current price is: $349.99.
- “Sprite” Direct Dual-gear Extruder: The“Sprite” is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments.
- High-precision Dual Z-axis: With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
- CR Touch Automatic Bed Leveling: 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy.
- PC Spring Steel Printing Platform: The innovative printing platform is a combination of a PC coating, a spring steel sheet, and a magnetic sticker, the model can be stuck to the platform or taken off easier.
- Power Loss Recovery and Filament Sensor: Ender 3 S1 features the function of detecting filament runout or breakage/power loss and resuming printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
- Quick Assembling: 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy.
- Low-noise Design: The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.
-
Sale!
$9.99 Original price was: $9.99.$6.99Current price is: $6.99.
- ESP32 CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
- ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB onboard antennas and cores based on ESP32 chips. It can work independently as a minimum system.
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
-
Sale!
$49.00 Original price was: $49.00.$39.00Current price is: $39.00.
-
Sale!
$41.00 Original price was: $41.00.$40.00Current price is: $40.00.
- 1.4GHz 64-bit quad-core processor, dual-band 2.4GHz, and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT).
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports, and Extended 40-pin GPIO header.
- 1 × full-size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output, and composite video port.
- 1GB LPDDR2 SDRAMï¼›Micro SD format for loading operating system and data storage. (Micro SD is Not included.)
-
Sale!
$28.99 Original price was: $28.99.$24.99Current price is: $24.99.
Makerbase Mks TS35 Touch Screen For Mks Dlc32 V2
-
Sale!
$145.00 Original price was: $145.00.$130.00Current price is: $130.00.
- Raspberry Pi 4 Model B 2GB
- 5inch Touch Screen
- 5MP Raspberry Pi Camera
- 16GB Micro SD Card
-
Sale!
$49.99 Original price was: $49.99.$44.99Current price is: $44.99.
- Integrated silent drivers.
- Low power consumption
- SD card slot
- CR-6 SE firmware preinstalled
-
$49.00
BIGTREETECH SKR CR6 V1.0，for Creality CR-6 SE
32-bit ARM-level Cortex-M3 series with 72MHz main frequency STM32F103RET6 chip.
Support BIGTREETECH-3.5 inch TFT color touch screen, LCD12864 screen, CR-6 original screen (DIWEN screen).
Dual Z-axis connectors.
