Showing 1–12 of 23 results

  • Sale! PEI spring steel

    3D Printing PEI Sheet, Textured both sided PEI Spring Steel Plate 310x310mm, fits CR10, Ender 3 Max/Neo, Tevo Tornado, Nereus, Artillery Sidewinder X1, Anet A8+, E12, Sapphire plus

    Original price was: $49.00.Current price is: $28.00.
    • Large Size: PEI spring steel sheet is 310mmx310mm/12.2×12.2-inch, fits most large format printers, including CR10, Ender 3 Max/Neo, Tevo Tornado, Nereus, Artillery Sidewinder X1, Anet A8+, E12, Sapphire plus
    • Easy to install: Stick the soft magnetic base to the heating bed of your 3D printer, then put the steel spring platform on top and you are ready to use. 
    • Textured Surface: The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling, perfect for PLA/ABS/TPU/PEFG/Nylon.
    • High Temperature Resistance: Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200℃ with no deformation
  • Sale!

    BIGTREETECH Module BTT TF Cloud V1.0 SD Cloud Wireless Transmission Module

    Original price was: $15.98.Current price is: $14.00.

    1) The module adopts ESP-12S, which is based on ESP8266’s low-power UART-WIFI chip module;
    2) The main frequency supports 80MHz and 160MHz;
    3) Spectrum range: 2412-2484MHZ;
    4) Logic voltage: DC 3.3v;
    5) USB input voltage: DC 5V;

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page

    10 in stock

  • Sale! 3D Printer Camera, Mintion Beagle Camera for 3D Printer

    3D Printer Camera, Mintion Beagle Camera for 3D Printer, Remote Monitoring, Plug&Play, WiFi Connection, Time-Lapse Video, with 32G Micro SD Card

    Original price was: $74.00.Current price is: $44.99.

    3D Printer Camera, Mintion Beagle Camera for 3D Printer

    • The Beagle camera is a compact, anti-slip, one-piece design, and the base supports 360 rotation. There are no complicated settings, only three steps to enjoy the camera– connect the cable to the printer and camera, download the “Beagleprint” APP, and finally connect the wifi. Please refer to the manual to get more details.
    • With Mintion Beagleprint camera, you can Real-time check the printing status and control your printers anywhere and anytime by PC browser (in LAN) or APP. Especially since you can stop the printing in time when meeting issues to save the filament and your time. (Note: Supports 2.4GHz wifi Only)
    • This 3d printer camera has embedded the codes in the system to capture the model’s image when one layer is finished, automatically backup to the sd card. Create fantastic time-lapse videos without any settings, and then you can download and share them with friends.
    • The Beagleprint is compatible with Most Marlin 3D Printers and supports the management of multiple 3D printers through numerous cameras. Note: please check the compatible 3d printer list before making the order.
    • No need to plug and unplug the SD card of the 3D printer. The beaglecamera is built in a 32G sd card; after the slice, you can upload and print by PC browser or APP. With beagle-print means high efficiency and more time, you are worth having.
  • Sale! Creality Sprite Pro

    Creality Sprite Pro Direct Drive Extruder Kit with 80N Stepper Motor and CRTouch, for Ender 3, Ender3v2, Ender 3 pro, Ender 3 Max, Support 1.75MM Filament

    • Genuine CRTouch Included.
    • Creality Sprite Pro Extruder Kit comes with a CR Touch short cable for compatibility with BL Touch/CR Touch. This Spirit extruder upgrade kit is compatible with Ender 3, Ender 3v2, Ender 3 pro, and Ender 3 Max.
    • With Compact and lightweight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder perfectly combines extruder and all-metal hot-end, enables all the Ender-3 series 3D printers a direct extrusion and high-temperature printing conditions, and supports PLA, TPU, PETG, ABS, PA, PC, etc, and other flexible filaments.
    • The use of gear with a 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal.
    • The Creality Sprite direct drive extruder adopts a double-toothed structure that does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models.
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page

    10 in stock

  • Sale!

    Essential Pack – Capricorn Bowden, Metal Extruder and Yellow Springs

    Original price was: $22.99.Current price is: $16.00.
    • Suitable for Ender 3/3 Pro, Ender 5, Ender 3 V2, or any other similar 3D Printer.
    • Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, Ender 3, it is stable and durable. UPGRADE: For the Creality upgraded version, a small pneumatic connector is no longer needed.
    • Creality Capricorn XS Series Low Friction PTFE Bowden Tubing 1 Meters for 1.75mm Filament
    • 8mm OD 25mm Length Compression Mould Die Springs Light Load for Heated Bed Ender 3 CR-10 CR-10Mini CR-10S/S4/S5 Series 3D Printer
    • Suitable for 1.75mm filament
  • Sale!

    TF Micro SD to SD card extension

    Original price was: $19.99.Current price is: $8.99.
    • Premium Materials: Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC. 48cm length design makes it flexible and long enough to extend and read your SD cards.
    • Type: SD to Micro SD Card Extension Adapter. Support the card 32G, easily make your navigation upgraded, much more convenient for your life.
    • Universal Compatibility: Widely compatible with GPS, DVD, DVR, LED/LCD screen, mobile phones, Raspberry Pi, and Creality 3D printers, such as CR-10, Ender 3/3 Pro, Ender 5/ 5 Pro, Anet A8 / A6, MonoPrice, and more.
    • Fast Reading Speed: Never affect the read and write speed of your machine, keeping it efficient and safe.
  • Sale!

    Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit Accessories for Creality Ender 3/ Ender 3 Pro/Ender 5/Ender 5 Pro/CR -10/CR-10S4/S5/CR20 and similar printers.

    Original price was: $51.00.Current price is: $29.99.

    BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. It could work with any kind of bed materials, such as glasses, woods, metals, and so on.

  • Sale!

    Nema 17 42 Stepper Motor Vibration Dampers (3pcs)

    Original price was: $13.99.Current price is: $6.00.
    •  Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer, eliminating vibration and effectively improving 3D printing quality
    • Each package contains 12 pieces of screws for you to use, enough for you to use and can provide a lot of convenience in the process of using
    • 1 Damper used per Stepper or Electric motor
    • 3D Printers see a 5-10dB reduction in noise when used on X and Y-Axis steppers with the vibration damper for NEMA 17
    • Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 Pair these with good filament for the best results in your 3D printer and remove vibration and noise
  • Sale!

    Ender 3 Direct drive upgrade kit – Helps you print with flex filament

    Original price was: $32.00.Current price is: $14.90.

    Ender 3 Direct Drive Upgrade kit

    Aluminum Alloy Ender 3 Direct Drive Upgrade Kit Plate For Creality CR10, Ender 3, Ender 3 Pro. Direct Extruder Adapter Plate, Complete kit.

  • Sale!

    Red Aluminum Extruders for Creality Ender 3 / 3 Pro / V2, CR-10, Ender 5

    Original price was: $19.99.Current price is: $9.00.
    • Right-hand extruder kit – Perfect replacement for Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. and similar 3D Printers.
    • Full metal aluminum alloy, DIY kit and you need to assemble by yourself. The extruder includes all the necessary screws & parts needed to directly replace your old original Creality plastic extruder.
    • All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
    • The advantage of this extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance.
    • The extruder has an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Creality 4.2.7 32bit Silent board with TMC2225 Stepper Driver Marlin 2.0.1 for Ender 3/3 Pro/3 V2/Ender 5/Ender 5 Pro or any similar printer

    • Super silent TMC2208 drivers.
    • Upgraded 32bit chip
    • Direct fit with Ender 3/ 3 Pro/ 3 V2/ Ender 5 / Ender 5 Pro.
    • Bootloader pre-installed, Update the firmware with SD card only
    • Separate port for BLTouch, No pin27 adapter needed
    • Separate port for filament detection sensor.
  • Sale!

    Dual Gear Metal Extruder kit

    Original price was: $22.00.Current price is: $15.00.
    • Double-gear and double-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength, ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.
    • Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/Ender 3 pro/Ender 5/Tornado, etc. For 1.75mm filament.
    • All-metal aluminum alloy, High-quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal dual gear extruder is stable and durable.
    • The product material adopts brand-new imported aviation aluminum material and is processed by CNC imported from Japan. DIY:You can simply install it by yourself.