-
Sale!
$9.99 Original price was: $9.99.$5.99Current price is: $5.99.
- Upgraded Hand Twist Levelling Nut：used for Creality CR-10/10S, CR-10 Mini, CR-X, CR-20, Ender 3，Ender 3 Pro, Ender 5
- 3D Printer Springs Accessories: compatible with most 3D Printer Bed, the die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing
- 3D Printer Screw Accessories：more durable，take less effort to adjust the screw，304 Stainless Steel / Knob
- Used for 3D Printer Upgraded Hand Twist Leveling Nut For Hotbed and Make the Hot Bed Become more stable，It will be easier to level for a print platform
-
Sale!
$12.99 – $18.99
- Original and high-quality 3D Printer accessories for Creality Ender 3
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 24V 40W
- Tip of the nozzle, aluminum heating block, throat pipe
- Suitable For Creality Ender 3 / 3 Pro or similar printers
-
Sale!
$19.99 Original price was: $19.99.$9.00Current price is: $9.00.
- Right-hand extruder kit – Perfect replacement for Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. and similar 3D Printers.
- Full metal aluminum alloy, DIY kit and you need to assemble by yourself. The extruder includes all the necessary screws & parts needed to directly replace your old original Creality plastic extruder.
- All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
- The advantage of this extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance.
- The extruder has an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
-
$45.00
- Super silent TMC2208 drivers.
- Upgraded 32bit chip
- Direct fit with Ender 3/ 3 Pro/ 3 V2/ Ender 5 / Ender 5 Pro.
- Bootloader pre-installed, Update the firmware with SD card only
- Separate port for BLTouch, No pin27 adapter needed
- Separate port for filament detection sensor.
-
Sale!
$25.00 – $30.00
- Fully assembled MK8 extruder set For Ender-3/ Ender-3 Pro/ Ender 5/ Ender 5 Pro and similar3D printer.
- Includes 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, Teflon Bowden, thermistor sensor, heating tube, etc.
- Stainless steel material nozzle throat and high-quality whose temperature can up to 260 °C/ 500 °F
- 24V high-speed fan, lose heat quickly and efficiently; nozzle and tube connect seamlessly, prevent material leaking and blocking.
- 100% brand new and durable and good performance, fully assembled, you can install directly in your 3D printer.
-
Sale!
$35.99 Original price was: $35.99.$28.00Current price is: $28.00.
- Primary output voltage (vdc): 5
- Output current (a): 60
- Maximum output power (w): 350
- Family: lrs-350
- Input voltage (vac): 90 to 132, 180 to 264
-
Sale!
$49.99 Original price was: $49.99.$44.99Current price is: $44.99.
- Integrated silent drivers.
- Low power consumption
- SD card slot
- CR-6 SE firmware preinstalled
-
Sale!
$16.00 Original price was: $16.00.$11.00Current price is: $11.00.
- Excellent adhesion: Creality carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
- Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water or alcohol. Easy to remove your print by hand or with a scraper.
- High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
- Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X.
-
Sale!
$22.00 – $27.99
- Genuine Creality Heated bed with Aluminum Platform
- Power: DC 24V 220W
- Heat Platform Bed dimensions, 235 x 235 x 3mm
- Material, Aluminum
-
Sale!
$25.00 – $31.00
Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY
MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS
CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
MK8 CR10 EXTRUDER HOT END KITS, WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
