Creality Ender 3 V2 – Unleash your creativity for less
Creality 3D Ender 3 V2 3D Printer,
Silent Mainboard Creality v4.4.2,
Color Screen,
X and Y belt tensioners
220x220x250mm build volume
Showing 1–12 of 15 results
-
-
Sale!
Brand new Genuine Fully Assembled Hotend assembly Kit for/Ender-3s/ Ender-3 Pro 3D Printer
$25.00 – $30.00- Fully assembled MK8 extruder set For Ender-3/ Ender-3 Pro/ Ender 5/ Ender 5 Pro and similar3D printer.
- Includes 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, Teflon Bowden, thermistor sensor, heating tube, etc.
- Stainless steel material nozzle throat and high-quality whose temperature can up to 260 °C/ 500 °F
- 24V high-speed fan, lose heat quickly and efficiently; nozzle and tube connect seamlessly, prevent material leaking and blocking.
- 100% brand new and durable and good performance, fully assembled, you can install directly in your 3D printer.
Select options This product has multiple variants. The options may be chosen on the product page3 in stock
-
Sale!
CR10 – Hotend Full Assembly
$25.00 – $31.00Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY
MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS
CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
MK8 CR10 EXTRUDER HOT END KITS, WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
Select options This product has multiple variants. The options may be chosen on the product page -
Creality 4.2.7 32bit Silent board with TMC2225 Stepper Driver Marlin 2.0.1 for Ender 3/3 Pro/3 V2/Ender 5/Ender 5 Pro or any similar printer
$45.00- Super silent TMC2208 drivers.
- Upgraded 32bit chip
- Direct fit with Ender 3/ 3 Pro/ 3 V2/ Ender 5 / Ender 5 Pro.
- Bootloader pre-installed, Update the firmware with SD card only
- Separate port for BLTouch, No pin27 adapter needed
- Separate port for filament detection sensor.
-
Sale!
Creality Carbon Silicon Ender 3 Pro Glass Bed Build Surface Ender 3/ Ender 3 Pro/Ender 5 / CR-20 Pro 3D Printer, 235x235x4mm
Original price was: $16.00.$11.00Current price is: $11.00.- Excellent adhesion: Creality carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
- Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water or alcohol. Easy to remove your print by hand or with a scraper.
- High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
- Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X.
-
Sale!
Creality CR-6 SE Motherboard
Original price was: $49.99.$44.99Current price is: $44.99.- Integrated silent drivers.
- Low power consumption
- SD card slot
- CR-6 SE firmware preinstalled
-
Sale!
Ender 3 / 3 Pro MK8 Hot end kit with Aluminum Heating Block
$12.99 – $18.99- Original and high-quality 3D Printer accessories for Creality Ender 3
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 24V 40W
- Tip of the nozzle, aluminum heating block, throat pipe
- Suitable For Creality Ender 3 / 3 Pro or similar printers
Select options This product has multiple variants. The options may be chosen on the product page5 in stock
-
Sale!
Essential Pack – Capricorn Bowden, Metal Extruder and Yellow Springs
Original price was: $22.99.$12.00Current price is: $12.00.- Suitable for Ender 3/3 Pro, Ender 5, Ender 3 V2, or any other similar 3D Printer.
- Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, Ender 3, it is stable and durable. UPGRADE: For the Creality upgraded version, a small pneumatic connector is no longer needed.
- Creality Capricorn XS Series Low Friction PTFE Bowden Tubing 1 Meters for 1.75mm Filament
- 8mm OD 25mm Length Compression Mould Die Springs Light Load for Heated Bed Ender 3 CR-10 CR-10Mini CR-10S/S4/S5 Series 3D Printer
- Suitable for 1.75mm filament
-
Sale!
Creality Bed leveling knobs – nuts with yellow springs
Original price was: $9.99.$5.99Current price is: $5.99.- Upgraded Hand Twist Levelling Nut：used for Creality CR-10/10S, CR-10 Mini, CR-X, CR-20, Ender 3，Ender 3 Pro, Ender 5
- 3D Printer Springs Accessories: compatible with most 3D Printer Bed, the die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing
- 3D Printer Screw Accessories：more durable，take less effort to adjust the screw，304 Stainless Steel / Knob
- Used for 3D Printer Upgraded Hand Twist Leveling Nut For Hotbed and Make the Hot Bed Become more stable，It will be easier to level for a print platform
-
Sale!
MEAN WELL Power Supply for Ender 3 Pro (LRS-350-5)
Original price was: $35.99.$28.00Current price is: $28.00.- Primary output voltage (vdc): 5
- Output current (a): 60
- Maximum output power (w): 350
- Family: lrs-350
- Input voltage (vac): 90 to 132, 180 to 264
-
Sale!
Open Box New Creality CR-6 SE 3D Printer – Your wish heard
Original price was: $429.00.$200.00Current price is: $200.00.- 4.3in HD Color LCD Touch Screen
- Foldable Spool Holder
- Auto-Leveling with Force Sensitive Resistor
- Bright LED Beside Nozzle
- Toolbox Storage Drawer
- Adjustable XY Rotary Belt Tensioners
- Photoelectric Filament Sensor
- New Extruder Locking Design (Flexible Fixator)
- Seamless Wiring System
- Creality Tempered (Carborundum) Glass Hotbed
- Optical End-stops
- 8-Bit (32-Bit – Kickstarter) Trinamic Drivers
- Resume Print Function
- Portable Carry Handle
- Dual Z-Axis
- Unique Caved Heatsink
-
Sale!
PEI Magnetic Bed for Ender 3/Pro Ender 5/Pro – 235x235mm
$26.00 – $29.00Brand new double-layer textured PEI powder steel plate.
235x235mm sheet
Fits Ender 3/3Pro, Ender 5/5Pro or any printer with 235x235mm bed size
Select options This product has multiple variants. The options may be chosen on the product page8 in stock